UV를 소스(source)로하여 레지스트(resist)의 유동성을 이용해서 나노 사이즈의 패턴을 전사하는 방법으로 기존의 Deep UV, EUV, X-ray를 사용한 방법보다 비용이 저렴하며 대량 생산이 가능하다는 장점이 있다.
2. 본론
⑴ Nano Imprint Lithography (NIL) 의 기본 원리
나노 임프린트 리소그래피는 초미세 가
1) Raising Hot Melts to a New Level of Performance
최근 PSAs(pressure sensitive adhesives)에 사용되는 접착제 원료의 종류에는 3가지가 있다. ① solventborne acrylics 와 고무, ② aqueous dispersions 그리고 ③SIS/SBS block-copolymer hot melts 가 그것이다. 이중에서도 SIS/SBS hot melts는 급속한 성장률을 보이고 있다. 이처럼 SIS/SBS hot melts가
of the elastomeric stamp of mold
Density of defects in the formed pattern
Difficulty in high-resolution registration
low viscosity UVcurable acrylated poly(dimethyl siloxane) material.
multi-functional acrylate cross-linker, free radical initiator.
When UV-vis light exposed, low viscosity UV-curable materials self-polymerize forming polymer network. (It will be rigid layer.)
UV 임프린팅에서는 낮은 점성의 UVcurable organosilicon monomer 레지스터로 사용하고 UV 투과를 위해 투명한 몰드를 사용하기 때문에, 패턴 정밀도를 높이고 광학적 정렬오차 조절이 가능합니다. 단 패터닝 소재 선택에 있어 제한이 있으며, 대면적 공정시 균일한 패턴 두께를 얻는 것이 어려운 단점이 있습니
Ⅳ. Method & Structure of implementation
1) 프로젝트 세부 실험목표 : Topas™ COC로 만든 두께 0.1cm의 컵을 가정하고, 그것의 UV 투과도를 토대로 살균 가능한 컵으로서의 가능성을 살펴본다.
2) 실험방법 :
① Tg=140℃의 Topas를 이용한다. (Topas의 Tg는 첨가된 norbornene의 양에 따라 80℃에서 180℃까지 변한다.)
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
1. 3D 프린터란?
3D프린터는 3차원 물체의 형태를 출력할 수 있는 장치이다. 지금까지의 출력방식인 평면 그림이나 글씨를 종이에 출력하는 것(2차원)과 달리 구와 같이 3차원적 사물을 만들어내는 것이고 그 출력 방식 또한 여러 가지가 존재 한다.
3D프린터의 가장 큰 장점은 복잡한 형태의 형상이라고
What is soft-lithography?
So, an alternative and non-photolithographic method that we call soft lithography was developed. Because this method uses a patterned elastomer(e.g. PDMS(Poly DiMethyl Siloxane)) as the stamp, mold, or mask to generate micro-patterns and microstructures, it was titled as 'soft' lithography. As compared with photo-lithography, soft lithography has many kinds of strength.
Random copolymer
Ethylene + Norbornene
Effect of Introduction of Norbornene
Increase irregularity
→ lower Xc → Amorphous
cf. PE: linear with high Xc
Increase Tg (∝mole fraction )
→ expand range of T of application
“Norbornene is more expensive than PC or PMMA!”
Alternative: Norbornene + PS + PMMA
→Decrease cost while maintaining advantages of Topas™ COC
1. 개요
고도 정보화 사회의 요구에 부응하여 12-cm 광디스크는 CDs, DVDs 및 최근에 개발이 진행된 블루레이 디스크(Blu-ray Disc: 이후, BD라 칭함) 표준화는 각각 1982, 1996, 2002년에 시작되어 고밀도, 고성능의 기술개발로 전개가 되고 있다. 각 매체의 기록용량은 그림 1에 나타낸 것처럼 0.8GB, 4.7GB 그리고 BD의